|
EASY STEPS TO iLoad If you're already familiar with using an iPod, here are the easy steps to using iLoad. (1) Using the USB connector cable, plug the thin wide end into the base of your iPod, and the other end into either of the two USB connectors on the rear of your iLoad. (2) Press the power button on your iLoad Control Panel. The iLoad system processes are starting. Soon, your iLoad LCD screen will read: Welcome to When iLoad is ready for use the LCD screen will read: Press GO to Read CD (3) Insert a CD into the CD slot on the front of your iLoad and wait a few seconds for it to "seat" itself. (4) Press the GO button after you have inserted your CD. (5) Your iPod display screen will now read: "Do Not Disconnect". (6) The album title and music library information will be displayed in the iLoad LCD screen. You can use the left and right arrow buttons to scroll between possible choices. If the displayed album information is correct press GO. Otherwise, select using the left and right arrows and then press the GO button. If the correct selection is not displayed, simply continue the process and see the "advanced options" section. Audio books or personal compilations are usually not contained in our “on-board” music database. On rare occasions some compact discs will not be in the iload “on-board” database. It is easy to update this information later. (7) When you press GO, you’ll see: Copy all tracks? Yes (8) If you want to copy the entire CD to the iPod, simply press the GO button. If not, toggle to "No" using the right arrow button and press GO. (9) You'll see each track title displayed and you'll be able to toggle between copy and Skip with the right and left arrow buttons, confirming your selection to COPY or SKIP that track each time with the GO button until all tracks have been displayed and selected. More choices are available: "Copy the Rest", "Skip the rest" and "Cancel copying". (10) At the end of the selection process, you'll be asked "Selections OK?” Yes, pressing GO will begin the copy process or toggling with the right arrow button to No will allow you to re-select the tracks that you'd like to copy. You can listen to a track while its selection is displayed by simply plugging in headphones or speakers to the line-out jack, located on the rear of the iLoad. It's the GREEN center 2.5mm jack. (11) Once your selections are complete, iLoad will begin copying the CD to the iPod. As this process continues, you'll see the track number displayed and the percentage complete of that track. As an example: Display of 1/14: 55% donemeans that iLoad is copying track 1 of 14 tracks and it is 55% complete. You can cancel the process by pressing the down arrow. When the copy process is complete, iLoad will eject your CD and will then ask if you would like to copy Another CD. Toggle between Yes and No using the arrow keys. (12) If you select Yes, simply insert another CD and repeat the process. If you select No, remove the CD from the iLoad slot (remember to handle CDs by their edges), eject the iPod by pressing the up arrow button, press the power button, and once your iPod has returned to its main menu, disconnect it from the iLoad and enjoy your music. When you're through using iLoad, it's best to disconnect the power cord from the rear of the iLoad device and from the AC wall outlet. Tip: clean compact discs copy faster than dirty or scratched compact discs Page 1: Version 1.02 User Guide Page 3: Warning Before you Connect Your iPod to iTunes Page 4: Using iLoad with your iPod for the first time Page 7: Updating Missing Song Information Without an Internet Connection |
Previous Page